How Do You Rate This Publication?       

Title:	Analysis of K-factor for five-ply plywood
Author(s):	Wangarrd, F.F.; Woodson, George E.; Wilcox, William R.
Date:	1973
Source:	Forest Products Journal, Vol. 23(4): 55-57
Description:	K-factor has long been used as a modifier of section modulus in the calculation of bending moment for plywood beams. No comparable modification of moment of intertia is included in current recommendations for calculating plywood deflection at span-depth ratios of 30:1 or greater. Results of limited testing lend support to the authors' contention that, where "shear" strains are significant, the same K value would be appropriate for predicting both the deflection and bending moment of plywood. If these results are confirmed by further investigation, a method for determining an appropriate value for k based on separate calculations of deflections due to shear and bending is suggested.
	View and Print this Publication (717 KB)
Publication Notes:	We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information. This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
	Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility