Browse Units


Contact Information

Southern
Research Station

200 W.T. Weaver Blvd.
Asheville, NC
28804-3454
(828) 257-4832
(828) 259-0503 TTY

Publication Information

 Evaluate this publication
How Do You Rate This Publication?
  Bookmark and Share       Mail this page

Title: Characterization of Defects in Lumber Using Color, Shape, and Density Information
Author(s): Bond, B.H.; Kline, D. Earl; Araman, Philip A.
Date: 1998
Source: Proceedings, International Conference on Multisource-Multisensor Information Fusion. II: 581-587.
Description: To help guide the development of multi-sensor machine vision systems for defect detection in lumber, a fundamental understanding of wood defects is needed. The purpose of this research was to advance the basic understanding of defects in lumber by describing them in terms of parameters that can be derived from color and x-ray scanning technologies and to demonstrate how these parameters can be used to differentiate defects in lumber. Color and x-ray images of intergrown knots, bark pockets, stain/ mineral streak, and clearwood were collected for red oak (Quercus rubra), Eastern white pine, (Pinus strobus), and sugar maple, (Acer saccharum) Parameters were measured for each defect class from the images and class differences were tested using analysis of variance techniques (ANOVA) and Tukey’s pair-wise comparisons with a = 0.05. Discriminant classifiers were then developed to demonstrate that an in-depth knowledge of how defect parameters relate between defect types could be used to develop the best possible classification methods. Classifiers developed using the knowledge of defect parameter relationships were found to provide higher classification accuracies for all defects and species than those which used all parameters and where variable selection procedures had been used.
View and Print this Publication (97 KB)     Evaluate this publication
Publication Notes: We recommend that you also print this page and attach it to the printout of the article, to retain the full citation information.
This article was written and prepared by U.S. Government employees on official time, and is therefore in the public domain. Our on-line publications are scanned and captured using Adobe Acrobat. During the capture process some typographical errors may occur. Please contact the SRS Webmaster, srswebmaster@fs.fed.us if you notice any errors which make this publication unuseable.
 [ Get Acrobat ] Get the latest version of the Adobe Acrobat reader or Acrobat Reader for Windows with Search and Accessibility